"I am in the process of making two three rotor units out of
1/8 thick 4130 so if any one is interested in a 2 rotor .096 version
let me know.
I will use one on the 3 rotor turbo compound engine.
It will be the same group buy situation.
We have an NC laser cutter located.
Paul Lamar"
Paul,
I'd be interested in one 20 B plate and one 13 rew 3rd gen type
plate; let me know developments..btw, $ in the mail to you for the
oil pan today.
Does this flex plate keep the ring gear in the same plane and
distance as the stock ring gear? I plan on using the stock AT 13B and
20 starters (AT only item).
Marc
Yep. That is the whole idea. Ring gear in stock position.
Paul Lamar
Anybody with a 13B flex plate handy please count the number of teeth
and tell me the OD and ID of the ring gear.
For the three rotor it is 125 teeth 320 mm OD and 291 mm ID. the
width of the ring gear is 13 mm.
You can use inches if you wish,
Paul Lamar
I will get out to the hangar this afternoon and try to dig it out
and measure it. C. Smith
you may contact Fidanza... they may be willing to sell their ring
gears for the Aluminum flywheels seperately.
josh
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.