Subject: dampened flex plate for 13B and 20B
From: rotaryeng
Date: 5/29/2013, 9:43 AM
To: AAA-rotaryeng



 "I am in the process of making two three rotor units out of

 1/8 thick 4130 so if any one is interested in a 2 rotor .096
 version let me
 know.

 I will use one on the 3 rotor turbo compound engine.

 It will be the same group buy situation.

 We have an NC laser cutter located.

 Paul Lamar"

 Paul,

 I'd be interested in one 20 B plate and one 13 rew 3rd gen type
 plate; let
 me know developments..btw, $ in the mail to you for the oil pan
 today.

 Does this flex plate keep the ring gear in the same plane and
 distance as
 the stock ring gear? I plan on using the stock AT 13B and 20
 starters (AT
 only item).

 Marc


 Yep. That is the whole idea. Ring gear in stock position.

 Paul Lamar


 Anybody with a 13B flex plate handy please count the number
 of teeth and tell me the OD and ID of the ring gear.

 For the three rotor it is 125 teeth 320 mm OD and 291 mm ID.
 the width of the ring gear is 13 mm.

 You can use inches if you wish,


 Paul Lamar



Paul,

Someone can confirm this, but I'm pretty sure the OD and ID of
the ring
gears, and spacing fore/aft are the same for the 13b and 20b flex
plates.
The difference is in the dish profile.  The RWS gearbox requires
using a
13b flex plate as that is the only one that matches up to the
flex-plate
adapter that comes with the RWS gearboxes.

Mark S.


OK we will standardize on the 13 B flex plate dimensions.

Paul Lamar


This is the specs on the 13B flex plate ring gear I think.
So far I have not found a source for just the ring gear.

116 teeth 298 mm 11.73" OD  269 mm 10.59" ID

If you have a flex plate double check these numbers.

If I cannot find a ring gear and you  want one of these send
me a flex plate with ring gear and we will separate the ring gear
and use that.

A Nissan is 1231209600 is close at 11.61 OD 10.340 ID is close with 115 teeth
same pitch I think. I should be able to buy a ring gear for that.

You might have to slot your mounting plate and move the starter in a fraction.

Paul Lamar


  The Rotary Engine News Letter. Powered by Linux.
  ACRE NL web site. http://www.rotaryeng.net
  You Tube http://tinyurl.com/beqqxas
  Copyright 1998-2013 All world wide rights reserved.