"I am in the process of making two three rotor units out of
1/8 thick 4130 so if any one is interested in a 2 rotor .096
version let me
know.
I will use one on the 3 rotor turbo compound engine.
It will be the same group buy situation.
We have an NC laser cutter located.
Paul Lamar"
Paul,
I'd be interested in one 20 B plate and one 13 rew 3rd gen type
plate; let
me know developments..btw, $ in the mail to you for the oil pan
today.
Does this flex plate keep the ring gear in the same plane and
distance as
the stock ring gear? I plan on using the stock AT 13B and 20
starters (AT
only item).
Marc
Yep. That is the whole idea. Ring gear in stock position.
Paul Lamar
Anybody with a 13B flex plate handy please count the number
of teeth and tell me the OD and ID of the ring gear.
For the three rotor it is 125 teeth 320 mm OD and 291 mm ID.
the width of the ring gear is 13 mm.
You can use inches if you wish,
Paul Lamar
I will get out to the hangar this afternoon and try to dig it out
and measure it.
C. Smith
Flex plate I have is the one 13b automatic Tracy Cook recommends
for his re-drive.
125 teeth
321mm O.D.
16.13mm ring gear depth so..
289mm I.D.
9.6mm ring gear thickness
32.6mm face to face of flex plate (ring gear inclusive)
1.92mm thickness of the flex web material.
C. Smith
Thanks Craig.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.