Anybody with a 13B flex plate handy please count the number of
teeth and tell me the OD and ID of the ring gear.
For the three rotor it is 125 teeth 320 mm OD and 291 mm ID.
the width of the ring gear is 13 mm.
You can use inches if you wish,
Paul Lamar
I will get out to the hangar this afternoon and try to dig it out
and measure it.
C. Smith
-----------------------------------------------
Paul,
Not positive about that inside dimension you got.
The 13Brew AT flex plate appears to be the same as the 20B flex
plate (and the Cosmo 13B engine, I believe-all 20Bs and Cosmos
were ATs). OD of ring gear appears to be 320mm using a scale (?);
ID of ring gear appears to be closer to 290 mm than your 291
(again using scale)? Still not a perfect way to measure....
Teeth are 13 mm wide across and ring is 15 mm deep from the edge
of the gear to the inside lip of the plate using a micrometer. I
also count 125 teeth.
Marc W
Thanks Marc
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.