I had to cut back the fins to clear the 10 mm bolt heads I still need one of Tray's spline plates to get accurate dimensions off of it. Does anybody have one they can loan me?

Also is anybody interested in testing this right now.
You have got to have an engine and gear box running.

If so I will find the Ford TX part Tracy made his spline plate from and buy one for testing.

--
Paul Lamar
--
I can loan you mine, but I won't get it out till Monday.
C. Smith



Great I'll see if I can find one today. If I fail I'll
take you up on the loan. Then we will build a proto
for testing.

Jeff says he will make ten sets at a time for
$300 each set. So we need to get ten people together.

Paul Lamar

Count me in, Paul. But you will need to get those Ford parts, because I have not decided on Tracy's psru yet.
Marc


It is going to matter as Tracy uses an odd ball spline out of the Ford
auto tranny rather than the standard spline from a manual transmission.

Tracy has sold over a 100 gear boxes.

We are addressing that market for couplings.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.