I had to cut back the fins to clear the 10 mm bolt heads I still need
one of Tray's spline plates to get accurate
dimensions off of it. Does anybody have one they can loan me?
Also is anybody interested in testing this right now. You have got to
have an engine and gear box running.
If so I will find the Ford TX part Tracy made his spline plate from
and buy one for testing.
-- Paul Lamar -- I can loan you mine, but I won't get it out till
Monday. C. Smith
Great I'll see if I can find one today. If I fail I'll take you up on
the loan. Then we will build a proto for testing.
Jeff says he will make ten sets at a time for $300 each set. So we
need to get ten people together.
Paul Lamar
I am still good for one...
Kevin DeVore Kerrville, TX
Hi Paul,
Just picking up on this thread, and.. Not sure I've seen the
rational for "why". That being said, I'm aware that Tracy's current
version of the drive has no damper (and does not use the flexplate)
That is what he is flying on the RV-4 and will be changing the RV-8
20B setup to the same. This comes with a new limitation... No Metal
Props..! (apparently no one is using them anyway) Though I'm aware
that that is Tracy's direction, I'm not aware of the reason to do
so...? From an engineering standpoint (which I'm not by the way..) I
guess I'm in the dark as to the rational. I'm simply a consumer.. I
currently have Tracy's 2:85 with the damper/flexplate arrangement. I
guess I (as will others) entrust this decision to...???? Tracy is a
pretty smart guy currently flying a non dampened set-up (again, I've
not heard why)
Paul.. you're a pretty smart guy too... and I appreciate the last
thread that this seems to be being made to the market (me and others)
already possessing drives, so... Perhaps I missed were the
collaboration was to go in opposite directions. Maybe some who are
reading want to see where your idea will end up... as Tracy is
flying his set-up. That is also very convicting. Perhaps as Tracy
has made clear... No Metal Props. Maybe this is for those doing just
that....???(using metal props) I know what the recips do to some
wood and fiber props (Ivo), but... This is a rotary and drive set
up, not Cont.'s or Lyc.'s. Just seems to be some grey area is all.
Thanks,
bruce Buksyk
I can't read Tracy's mind but the rest of the world has been dealing
with props as well as other high rotational inertia devices mounted
on gear box's and shafts driven by intermittent internal combustion
engines for a 100 years. Motor cycle drives are good examples. So too
clutch plates in manual transmission cars. Auto trannies have fluid
torque converters.
Let me know when he has a 1000 hours on it :)
I just bought a $1000 gear box that connects a turbine to a diesel
engine. Guess what? It has a fluid coupling to deal with the power
pulses. These are used in million mile over the road tractors as in"
tractor trailers".
Tracy has been selling a flex plate drive with ineffective rubber
bushings for years. Rubber is no longer rubber when it is completely
enclosed.
It resonated at 1800 engine RPM. I flew back from Reno with Dave
Leonard in his turbo 13B and I noticed he set less than 1800 engine
RPM on final approach. Dave is among those people that have destroyed
flex plates and sheared pins in sun gears.
In some cases heavy flywheels bolted directly to the crankshaft are
used to mitigate the torque pulses. Every automotive piston engine
that I am aware of uses a torsional damnper on the nose of the
crank.
The latest is sheared bolts in planetary ring gear bulkheads.
Paul Lamar
In my last conversation with Tracy, he said his recommendation was to use
the Mazda aluminum racing flywheel instead of the flex plate. He sent me a
link for one on Ebay that cost about 200.00, and had an integral counter
weight for the engine. This eliminated the issue of the bolt holes breaking
out in the flex plate, and flex plate cracks around the crankshaft. He told
me then that he was redesigning the adapter plate to eliminate the rubber
bushings, that I should use the aluminum flywheel, and limit the PSRU to
non-metal props. We discussed the resonance then, and his recommendation
was for the Catto prop.
I cant read Tracys mind either, but I know that we had this conversation
about 2 years ago.
Kevin Alderman
The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.