Pics of my flex plate assy. (with bolts instead of rivets).

Mark

Nice Mark. Safety factor of 50 :)


I am having a lot of trouble finding a 10 MM hex drive flat head
metric bolt with 1 mm pitch that will hold the flex plate to the
counter weight. That means we will lose about .3 inches on the width
of the rubber bushings. Plenty of them out there with 1.25 pitch. 1
mm pitch is called super fine.

If anybody knows where I can get such an animal please speak up. Bolt
Depo was no help. Same for McMaster. East Coast 800 638 1830 John is
checking his Japanese supplier.

Paul Lamar

Paul, what length are you looking for and how long is the shoulder ?

John

Top of head to end of threads 40 mm
Just like this but Pitch 1 mm and grade 8 or grade 5 steel.

Paul Lamar

-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.