Subject: coupling welded version major clitch. solved 3 final
From: rotaryeng
Date: 6/10/2013, 10:54 PM
To: AAA-rotaryeng


Hey Paul

I would be interested in one of these flex plates also.

Bob Mears

We have done further R&D.

This is the latest and final version (I hope).

Mark will be testing it on his 3 rotor p-port shortly.

Here is how it looks. If you want one of the couplings prepare to
send me a spline plate. Either new from ebay ($37) or the one you
bought from Tracy and your input shaft. I can add another pin to
the gear and cut the drums off the new spline plate and machine it
to fit. I will mod the input shaft. Very little heat will be
required as braze will work.

You will have to drill out the 1/4 inch bolts holding the ring
gear bulkhead and replace them with 5/16th bolts.

This will fix the gear box problems showing up in the last 5 years
or so with the higher power rotaries. Turbo, p-port and 3 rotor.

Mark. I am buying the material today. It will take a few days to
water jet cut some of the parts. When they are done I will send you
a kit for welding and testing.


Paul Lamar


Paul please puy me down for one too as I'll be changing to higher
horsepower with the p port eventually - Alex


The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.