Paul,

        I meant to say BD4 to 13B mount plans available?

 Ben Lane


 Can you tig weld?


 No plans but I can send you tubing lengths for our universal
 mount.

 Here is a universal mount on a Tango.
 The universal mount eliminates the need for a welding jig.


 Paul Lamar



 Hey Ben Lane,

 I am working a BD-4 project and also seeking the BD-4 to 13B mount. I can TIG weld. Feel
 free to contact me directly regarding the BD-4. I'm in Auburn Nebraska (that's 60 miles
 south of Omaha).

 John Lindinger

 N1404A 1951 Tripacer 125HP (Flying)
 [Unregistered] BD-4 0HP (Project)
 1993 Mazda RX-7 350HP Single Turbo Mod (Daily Driver)

 John, I don't publish the phone numbers and email adress
 to discourage the bots but will forward the info in
 private email to anyone that request it.

 Paul Lamar

 I will @ some point John. thanks


Ben Lane


 Paul, What happened to the robo welder? Maybe he wasn't on list for that.

 Might be easier to do them a batch job of bd4 mounts.
 C Smith


I still have it. That is an option to welding it yourself.

Ben, Craig is referring to a machine I built
to weld fittings on the end of 4130 motor mount one inch round tube
members automatically. It only works for the round tubes.

There are two one inch square tube ends in each mount that must be welded by
hand. My part time welder can do that for a small charge but any person that
tig weld can do that rather easily.


Here are some pictures.


Paul Lamar