Subject: Fwd: Re: auxiliary port valves
From: rotaryeng
Date: 6/22/2013, 8:06 PM
To: AAA-rotaryeng



I have built a custom intake for my 13B 6 port induction intake. How would you normally
fix the two auxiliary port valves in its open position ?

If I well remember, Tracy suggested to glue them with epoxy.  Is this the way most
people are doing it or is there a better way? I appreciate your comments.  Thanks

Ramon


I have no experience with those. I would go with what Tracy suggest in this case.


Paul Lamar


Ramon, I have seen them removed and the square  corner just at the end of
the runner  filled with JB weld or equivalent to streamline the runner.
                       George g


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.