I have built a custom intake for my 13B 6 port induction intake. How
would you normally
 fix the two auxiliary port valves in its open position ?

 If I well remember, Tracy suggested to glue them with epoxy.  Is this the
way most
 people are doing it or is there a better way? I appreciate your comments.
Thanks

 Ramon


 I have no experience with those. I would go with what Tracy suggest in
this case.


 Paul Lamar


 Ramon, I have seen them removed and the square  corner just at the end of
the runner  filled with JB weld or equivalent to streamline the runner.
                        George g


Thanks for your inputs.

Ramon