Subject:
best way to cut drums off spline plate
From:
rotaryeng
Date:
6/23/2013, 12:22 PM
To:
AAA-rotaryeng
Mikita hand held friction saw.
Not a good idea piloting on the .030 thick
larger diameter on the spline plate. Interferes with
the smaller tube.
I'll just cut that down when I cut off the drums.
Paul Lamar
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
.
You Tube
http://tinyurl.com/beqqxas
.
Copyright 1998-2013 All world wide rights reserved.
Attachments-95/P1140444.jpg
Attachments-95/P1140502.JPG
Attachments-95/P1140514.JPG
Attachments-95/P1140518.JPG