Paul, OK, so the turbo compound isn't a good match for my RX-7,,, yet
;(. So is a "street Porting" worth the $500 that they want for the
templates? If so, does anyone have a set that I can borrow or make a
copy of? Also who would be the better supplier for all the seals,
springs, gaskets and everything needed to reassemble my baby? I've
heard over the years, pros and con's for all of the suppliers. Would
the street porting change anything else? (mas air flow sensors, fuel
economy, computer brains) Right now it is completely stock, Just
looking for better then stock performance w/ good reliability. Thanks
Paul,


Thomas Max

I would not street port. I would  P-port it. Cheaper and better.

Scroll down to the end of the first page.

http://www.rotaryeng.net

Read this.

http://www.rotaryeng.net/intake.html

http://www.rotaryeng.net/fund-of-intake.html

http://www.rotaryeng.net/Welded-steel-p-port.html

Use only stock or Ianetti ceramic seals.

Use teflon encapsulated O-rings.

read this

http://www.rotaryeng.net/seals.html

http://www.rotaryeng.net/history.html

http://www.rotaryeng.net/O-ring-size2.html


Get everything from Mazdatrix.

Paul Lamar


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.