Subject: I am thinking of getting in the computer biz again
From: rotaryeng
Date: 6/30/2013, 3:10 PM
To: AAA-rotaryeng


We get so many Windows related virus's and general software mischief
that people need a computer to connect to the Internet that is
immune to that sort of thing.

What I am proposing is a mother board and hard drive with Linux\Mint\Mate
installed on the hard drive. You buy your own case power supply,keyboard
and mouse or use the one's you have now. Fry's has a very nice case and
power supply for about $35. Mother board mounting in computer cases is
standardized.


http://www.frys.com/product/6535653#detailed

http://www.frys.com/product/6660294?site=sr:SEARCH:MAIN_RSLT_PG


Your cost is $300 for a one 1000 gig drive and mother board with Linux
installed on the hard drive. Plus shipping in the US.

Linux Mint/Mate is very easy to use. It looks like and is about the
same as Windows/XP/7. Not Windoze Hate. Also there is tons of free
support on the Internet not to mention 47,000 free programs that can
be downloaded and automatically installedwith the click of a "button".


Paul Lamar


For the shop computer, running my CNC router,  I went with a cheap $99
PC from Discount Electronics:
Shop environment isn't good to computers, but put in a box with air
filter (from my 6.0liter Chevy 2500HD)
and a fan to pressurize the case and it should be good and cool. I have
a dell monitor with USB ports, so data
is kept on the thumb drive.
http://www.discountelectronics.com/product?product_id=16721&product_model=12

I'd love to learn MINT/MATE....  just not enough hours.

I finally did get Rhino 5 on your recommendations. Steep learning curve,
lots to learn. It will come in handy.
Did find a cool AN Bolt Generator Plug in...
http://mcvanaero.com/resources.html

Tom Walter

Takes 5 minutes to learn Mate :) Anybody that has a used a Windows computer
or a Mac have no trouble adapting with out training.

Rhino is no where near as steep as Solid Works. 5 may be as bit harder
as I am still using 4.

Solid works starts with a simple shape and features are added.

Rhino starts with a block of material and some material is machined
off and holes drilled. For a machinist Rhino is therefore more
intuitive. Also people are used to reading dwgs in 3 views. Another
point in Rhino's favor.

After using Rhino for ten years or so my ideas now occur
in 3D :)


Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.