You know, it will cost over a quarter of a million dollars to replace the
diesels in my boat, and with that in mind I am watching the TC rotary
with
genuine interest. My 12V71s are rated at 550HP each at 2200 RPM, but I
never run them at that because of the fuel burn. I have even
considered the
cruise ship approach- 3 generators and use electric motors to turn the
props. As the load increases, fire up another generator.
I run the diesels at around 1200 RPM because the fuel burn is almost
exponential after that- at 1200 RPM x 2 engines the fuel burn is
around 17
gph (total) and my speed is around 11 knots. At 2000 RPM the speed
goes to
18 knots, and the fuel burn passes 65 gph (total). less than 1/3 mile par
gallon, Obama would be shocked!
I have a fuel burn chart from DD for these engines at various RPM and HP,
when I get time to look through all these HDDs I will send it to you- but
here is what is important-
My props are 32" dia x 29 pitch, 4 blades put through a 2:1 gear box.
Each
12V71 weighs around 2.5 tons. Yep, 2.5 tons. And the Allison gear drives
weigh 850 lbs each, in addition to the engine weight. Not to mention that
these engines are loud, and are as big as the back of my truck. To get
them
out requires a big hole be cut in the side of the boat.
I have been looking into the Detroit Diesel series 60 650 HP diesels as
replacements. I would need to change the flywheel, bellhousing and add a
heat exchanger to make it work, but thats easy. I can get a reman
Series 60
for just over 12K in a box, which isn't too bad considering over 110K
for a
"marine" engine. The other plus is a 1/3 decrease in fuel burn and 2.5
tons
less weight.
As far as the TC rotary, we would need a 6:1 gear box, but I would be
interested in trying it out. Can you imagine the look on the other
captains
faces when I pass them in a boat that weighs 81,000 lbs with engines that
are as big in diameter as their toilet?
Thanks for the hard work Paul, we really appreciate it.
KA
Here is what it looks like currently.
Next project is the exhaust plumbing.
Paul Lamar
From SAE: 'Diesel emissions and their control', by Magdi K
Khair and W Addy Majewski.
Decemebr 2006, product code R-303, $149.95 (non members)
If anybody buys it, please tell us
www.sae.org
J G A