Subject: New PSRU and torsional damper
From: rotaryeng
Date: 7/2/2013, 11:07 PM
To: AAA-rotaryeng



 "In the future when one is trying to be helpful think of the space
 and weight of what one is suggesting. Get a dwg. of the device and
 see if it will fit in a 6 inch dia. cyl. and 1.7 inches long. The
 devil is always in the details. "

 What is it about engineering and dimensions I am not being perfectly
 clear about?

 Before one sends something in.... do one's engineering home work
and scale  dwgs.

 Paul Lamar


Hey Paul,

What is the internal diameter that must be reserved for shafting?

6" OD x 1.7" L x ??" ID


  Mark LaPierre

There is no shafting. It bolts to the counter weight
and a Tracy's spline plate. The spline plate is reversed
to the orientation Tracy uses.


Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.