The coupler is done.
This is a bit over kill for 50 HP but when the rotary starts up it is
going to try to spin up the turbine through the fluid couplings.
Another point.
We may need a more powerful starter motor as the turbine will have to be
spun to 3000 RPM while the engine is cranking at 500 RPM.
This took a relatively long time and one false start got discarded.
Paul Lamar
Do you have any photo's of the whole kit and caboodle? The way that looks, with my engine
in the rear, half of it would be in my back seat. Thanks. Love the progress updates.
Exciting.
Chris
Not flight hardware. Dyno test only.
It is going to weigh close to 450 pounds.
Paul Lamar