Subject: Major mile stone on turbo compound
From: rotaryeng
Date: 7/10/2013, 3:39 AM
To: AAA-rotaryeng




The coupler is done.

This is a bit over kill for 50 HP but when the rotary starts up it

is going to try to spin up the turbine through the fluid couplings.



Another point.

We may need a more powerful starter motor as the turbine will have

to be spun to 3000 RPM while the engine is cranking at 500 RPM.



This took a relatively long time and one false start got discarded.



Paul Lamat5




I do not think I would worry a lot about the startup. The fluid coupling
should just slip for a couple of seconds. The air/exhaust will spin the
turbine fairly quickly.



Dale Davies

Why does your email program place a blank line between everything you
forward. Are you still using Windows Hate.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.