The coupler is done.
This is a bit over kill for 50 HP but when the rotary starts up it is
going to try to spin up the turbine through the fluid couplings.
Another point.
We may need a more powerful starter motor as the turbine will have to be
spun to 3000 RPM while the engine is cranking at 500 RPM.
This took a relatively long time and one false start got discarded.
Paul Lamat5
--
Paul,
Have you considered putting a sprag clutch in it? That way the turbine
would be free of the engine until it is producing power.
Steve Brazil
Too much work.
BTW any unburnt hydro carbons in the exhaust can be recovered
by pumping in some fresh air with an old smog pump after
the turbo chargers.
Paul Lamar
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.