Subject: Major mile stone on turbo compound
From: rotaryeng
Date: 7/10/2013, 4:00 AM
To: AAA-rotaryeng




The coupler is done.
This is a bit over kill for 50 HP  but when the rotary starts up it is
going to try to spin up the turbine  through the fluid couplings.

Another point.
We may need a more  powerful starter motor as the turbine will have to be
spun to 3000 RPM  while the engine is cranking at 500 RPM.


This took a relatively  long time and one false start got discarded.

Paul Lamar


Do  you have any photo's of the whole kit and caboodle?  The way that
looks,  with my engine
in the rear, half of it would be in my back seat.   Thanks.  Love the
progress updates.
Exciting.

Chris


Not flight hardware. Dyno test  only.

It is going to weigh close to 450 pounds.

Paul  Lamar



Paul --

Am I missing something? According to the little arrows marked on the
turbine gearbox in one of the photos, either the engine or the turbine will be
running backwards, and I don't think rotaries run backwards very well. I'm
certain there's an explanation.

Fuller

I put those on by mistake before I had the turbine part.

How's it going Don ? If you get up to Santa Paula let me know
and you can tour the hangar and have drive in the RX8.

I am thinking of getting an article in Pop Mechanics about the TC.
Are you interested in writing it ?

Also the time to climb 600 HP 2 rotor turbo Harmon Rocket is out in
your neck of the woods at Corona airport. I will let you know when Racing
Beat gets the engine mounted. I would like some pictures.
That would make a great article too.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.