The coupler is done.
Another point.
progress updates.
Not flight hardware. Dyno test only.
running backwards, and I don't think rotaries run backwards very well. I'm
I am thinking of getting an article in Pop Mechanics about the TC.
your neck of the woods at Corona airport. I will let you know when Racing
Beat gets the engine mounted. I would like some pictures.
--
Paul --
Lemme get this straight. You made a mistake? Paul, Paul, Paul -- must be
those advancing years taking their pesky toll.
As for getting up to Santa Paula that don't haps much often, but it
would
be great to visit and see what you got going.
However, if you need a typewriter banger to knock out the TC piece we
can
certainly talk about that. I have been a fan of turbocompounding for
years.
One of my amazingly brilliant ideas -- about which I may have told
you and
about which I am sure, if I did, you would have rolled your eyes --
was for
race cars. It went like this: Use a couple of turbocharger exhaust
turbine
sections, one per side, and have them connected to reduction
gearboxes (as
with the Detroit Diesel TC unit) and have that power fed directly
into the
output sides of the rear-mounted gearbox, so the power gain goes
directly
to the rear wheels. The engine remains normally aspirated. It probably
wouldn't work so well for road racing, where there is lots of engine and
vehicle-speed variation, but for, say, Indianapolis or Pocono, where
they're
pretty much flat out just about all the time it could be beneficial,
both from
power and fuel economy standpoints. The reason the engine would remain
normally aspirated (this was obviously thought of back in the days of
different
engine choices based on stock blocks and aspiration, etc) was that you
would use a large-displacement stock block and not be limited by the
rules to
a smaller engine. I figure it also wouldn't make it past the first three
minutes of tech inspection, if that.
My years in SCCA racing taught me that tech inspectors have absolutely
no
sense of humor and often the creativity of a cinder block.
Also, my dad was an engineer at Douglas during WWII and after that,
then at
Aero Commander, then back at Douglas and then when it became
McDonnell-Douglas. He used to tell me about the TC radials in
aircraft in those day and
their remarkable efficiency. He also noted their remarkable maintenance
issues.
As for the Corona airport mayhaps I'll get out there and take a peek.
Lemme
know which hanger. I promise not to break anything.
These days I'm driving a 2008 MINI Cooper S. One of the best things I've
ever purchased. It's just a giggle to have waiting in the garage.
Barbara and
I are still married; 46 years next month and she's still the love of my
life. Why she has stayed with me is a mystery for the ages, because
she sure
as shit coulda done mo' bettah.
You take care of yourself, amigo --
Best --
Fuller
I vaguely remember having that conversation with you about cheating
with a turbo compound :)
The TC maintenance issue were mainly about the failing exhaust valves.
What is an exhaust valve ? :)
The time to climb engine is still on the dyno at Racing Beat in Anaheim.
Being a one time a PR guy at Mazda USA I am sure you know Jim M.
That is also a story worthy of national media if they come close to the
record.
Stuffing 600 horses in a 1500 pound experimental and cooling them is no
mean feat.
There could be a title in that :)
I'll let you know when the engine makes it to the hangar and in the
airplane.
Paul Lamar
Yes, back in the day I knew Mederer and Oku. Used to drop by the shop from
time to time. Good guys. I wish them well. About being a PR guy for
anybody: Yep, I did it. Hated every goddamn minute. Had to make the house payment
and buy groceries. It's not the worst job I've had to make ends meet. I've
also spent some time selling cars, did some BMW and some Honda. Hated that,
too. Had to make payments and buy groceries.
Looking forward to seeing Mederer's time-to-climb deal. Gonna use JATO
bottles?
And, for that, why would delivering exhaust energy directly to the output
sides of the gearbox be considered cheating? You accuse me of trying to make
a mockery of the rulebook? I say, the guys who write the rulebooks are the
ones who make a mockery of them.
Years ago I was racing a Nissan in Showroom Stock. The rules said the car
had to be raced as it was manufactured. Trouble was, the one I was able to
get my hands on had a sunroof. I wanted to take the sunroof out and replace
it with a stock roof panel, but that was illegal. F##$ that. So I got all
the pieces, including the replacement headliner and even the dome lamp, and
had a body guy take out the sunroof and weld in the appropriate patch from
the plain roof panel. But he wasn't careful with the heat and it was warped
all to hell. So I ordered a big waving American flag vinyl sticker that
covered the whole roof, so when people said they thought the roof was warped
I just said no, that's just an optical illusion from the waving flag
sticker. Worked every time.
Notice how, last week, NASCAR caught, I think it was, 31 teams that had
fudged the roof flap spoiler spacers and just yesterday announced NO
PENALTIES! I admit there was no performance advantage, but NASCAR says a rule is a
rule.
Fuller
While working for Mazda Don Fuller went to japan and drove the prototype
first gen RX7 and advised Mazda on the handling set up. If you
like the handling, and most of us did, thank Don. I thought it was
well balanced and perfect. I owned two first gen RX7. Wonderful
car to drive. Here are some pictures of my cream puff 83.
I sold it within 2 hours on here when I got the RX8.
No room for 2 sports cars.
Paul Lamar
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.