Subject: Major mile stone on turbo compound
From: rotaryeng
Date: 7/11/2013, 1:19 AM
To: AAA-rotaryeng


Once the design is proven, weight reduction can be worked on. The turbine housing will be
the heaviest parts. If the casting could be copied in lighter alloy such as titanium
aluminide, the total weight would be reduced significantly. Then with alloy end housing
the assembly may be low enough to be manageable.

Dale Davies


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.