Subject: Socket head screws for the new torsional dampler
From: rotaryeng
Date: 7/13/2013, 10:41 PM
To: AAA-rotaryeng



I finally got the right metric screws. They will be in the kit
after Mark S gets done testing it with the 3 rotor Lancair ES.

This will allow us to pour liquid silicone rubber in
the damper and let it cure before installation using
long Allen wrenches.

The head of the screws will be inserting into a pieces
of 1/2" ID silicone hose that will remain in the damper.

I will use this damper with the Ross copy gear box.

Paul Lamar

Paul

Where did you finally find the 10mm x 1.00 thread metric bolts ??

Kelly Troyer

10 mm 1.25 threads per mm 20 mm long.
Metric Specialties Santa Clarita Ca.


Paul Lamar


Paul, in Metric the thread definition is OD (here 10 mm) x distance between
threads in mm (here 1.25 or 1.0). Standard is M10 x 1.5 mm.

Metric does not give a number of threads per a distance, it gives the
distance between threads in mm.

Rolf

Maybe that is why I have so much  trouble :)

Paul Lamar

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.