Subject: Russian radial psru gov
From: rotaryeng
Date: 7/14/2013, 6:49 PM
To: AAA-rotaryeng


 http://motorstarna.com/m14p-engines/history

 ROMANIAN PRODUCTION

 In 1983 there was established in Romania, the Aviation Engines and Reducers Plant of I.Av.
 Bacau. They produced the Yak-52 airplane. They also started producing the M-14P and
 M-14V26 engines, the reducers R-26 and VR-126 and the jet engine RU-19A300.  The company
 I.Av. Bacau has since become S.C. AEROSTAR S.A.  The former Aviation Engines and Reducers
 Plant is now a separate company having the name MOTORSTAR S.R.L.

 Starting with the year 1999, MotorStar S.R.L. introduced some improvements at the M-14P
 engines. They developed an adapter drive for UMA tachometers and an adapter for Skytronics
 alternators. They also developed and installed an adapter drive for a vacuum pump. The
 engine look was improved by adding the œdress kit consisting of
 many chrome plated bits.
   They developed a œWestern SAE#2 propeller shaft for the engine. In 2000 they
 developed
 the Romanian 400 HP version. The gear train of the supercharger was modified and the
 maximum impeller speed reached 30000 RPM. The result is a higher manifold pressure and
 more power.

 In 2001 MotorStar S.R.L. developed an electric start system for the M-14P engine using the
 electric starter, produced by B&C.

 Also in 2001, MotorStar S.R.L. Designed and began manufacture of the M-14D.

 Based on the M-14V26 engine the M-14D is a direct drive engine with the similar
 performance as the Continental W-670 engine, but smaller diameter and less weight.

 MotorStar S.R.L. continues to produce the M-14P engine as well as overhaul the M14P, the
 M-14V26 and the AI-14R engines.

 ==============================================================
 The engines cost about $30,000.

 It is not clear to me how the ring gear is driven by the crank
 shaft. In the rotary application the ring gear will be held stationary and
 the sun gear will be driven. Fortunately the power will be out
 of the planet carrier which is the same situation for the radial
 as well as the rotary. This might be rather easy to do with only
 a few new parts. My guess is the gear box will be about $5000.

 P-port 3 rotor engines can be made with after market parts made in Oz or
 New Zealand using stock 13b rotors, end housings and rotor housings.
 This gear box would be a good match.

 Paul Lamar

 Here is some info on the gov.

 Paul Lamar

 In this dwg it looks like the gov is driven off the cam shaft.
 In that case it will be necessary to drive the gov off a cog
 belt on the nose of the e-shaft. That will requires a mounting
 bracket with a ball bearing to take belt loads.

 BTW It is now obvious how the ring gear is driven by the crank.

 Paul Lamar

 Paul,

 Unfortunately the governor is run off the cam plate and uses engine speed
 not propeller speed.

 The engine turns at 2900 rpms redline. There will need to be some new
 gearing to make the input shaft to the governor the same speed.

 Pictures of the governor aren't going to help you need pictures of
 the governor drive and the cam plate to figure out the ratio so we can
 work out the new ratio for 7000 rpms
 (engine rpms)

 The camplate is sound but the crankshaft (which will be the shaft
 that is attached to the fly wheel.

 Will


 You don't have to use the Russian gov. A US gov may be a better
 match for a US prop.

 Paul Lamar


 Paul ,

 I see that now. Wow Where can I get a bracket like that??  That simplifies
the adaptation immensely.

 Will


 The company that made that went out of biz.

 Paul Lamar

Great!! Any chance you could make me one?

Will

I don't have time now. I must get this turbo compound 3 rotor
ready to test on the dyno.

Contact John Lynch designs.
John Lynch <j.r.lynch@gte.net>

He is a pilot and a home builder (RV4) and owns a NC machine shop
as well as being a good engineer.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.