Looks rather cannon prof.
What is the overall length? Should be kept to 15 inches to fit in most cowls.

Paul Lamar



For a test item it may yield significant data. If it shows promise we can always try
lightening it. The drive itself is just under 13 inches.

Milo

That is a nice sun gear spline. Where did you get it and the mating
female part? A bit overkill for only 300 foot pounds.


Paul Lamar


Paul,

We have enough pieces now to get good measurements, so far no glitches.
Milo

The critical measurement is from the bell housing mounting surface
to the prop flange. If you are using a Mazda bell housing part
of the PSRU must be recessed into the bell housing which I think
you are doing. Is that a Mazda bell housing?

Paul Lamar