Paul,
Here is the latest.
 
Everything finally connects and clears the mount and the cowl clears.
 
I made the brackets that mount the tubes to the airframe out of carbon fiber.
 
The pieces that hold the fuel rails in place are carbon fiber.
 
Each piece has one layer of Eglass on the outside layer so carbon is not in contact with metals.
 
The metal plenum will seal with the tubes as the MAF sensor using silicone sealant.  Tubes and sensor
fit inside metal tubes welded into the plenum.
 
The flight engine is in place to ensure the slide throttle works.
 
Joe Berki
Limo EZ


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.