Hi Karibian

We are not flying yet.
We chose to use the original Renesis manifold as it appears to be very
solid.
Heavy sections with what appears to be inconel liner plus various layers
of insulation/shields.
Down side is our exhaust is very heavy.


Steve Izett

--  Those EGT sensors are going to run very hot Steve. That might be OK
if they don't fail. Just adjust your thinking :)

Paul Lamar




When I cut into the jog to turn it down I learned there was a slip joint
at that point. unfortunately I had cut into that also. Even though I
welded that part I didn't feel right about it so I bought another
manifold and will only cut  the outer part this time.