Paul and group,
           After nearly 3 months and all the promises from planexhaust
my job remains undone.  last time they did such a fantastic job it
clearly enticed me to return for a second go, but if the job is not done
the workmanship becomes irrelevant.  So I will now cancel the order and
look around for 321 s/s to do the job myself.  Bends etc. I can get from
aircraft spruce, but that leaves the material for a muffler,  say 5 feet
of 2.5 inch tube and 6 feet by approx 18 inch for the outer shroud.  Can
you give me avenues to source this material as here in OZ 321 s/s is
almost  extinct from my initial enquiries.  my thanks again,  Neil.


================================================
try  Ashland Muffler House Inc

(419) 289-2233

1710 Claremont Ave, Ashland, OH 44805

they have some 3" OD .071 wall 5 feet long for 33.50 US

The add is on ebay but you can deal direct

========================================================

I've done biz with Burns Stainless for years


http://www.burnsstainless.com/straighttubing-2.aspx?page=4

    
Burns Stainless
1013 W. 18th St.
Costa Mesa, Ca 92627
(949) 631-5120
Fax (949) 631-3184
vince@burnsstainless

==============================================

You got to get that thing flying as I am going to come
down there and go for a ride.

Paul Lamar