Vespa Piaggio motor scooter stator and rotor has the potential for a
low cost capacitor discharge ignition system.
Milo has done some work on this already using much more expensive
outboard motor parts. Vespa's are made in the millions and the cost of
manufacture is much lower. The parts are pretty much the same as the
outboard parts but smaller.
The secret to this approach is the stator has a high voltage coil that
charges the ignition capacitor. This is a much cheaper and more reliable
way of providing 400 volts for the CD ignition.
Here is a new one on ebay for $105 plus $24 for shipping. Made in Israel.
Complete stator and rotating drum with magnets.
The higher RPM rotary will generate higher capacitor charging current.
This is a very low cost CD ignition system that will also provide a low
current back up alternator in case the main electrical system fails.
It is conceivable this will fit in my proposed new Ross copy gear box.
Paul Lamar
Paul,
I could not find the $105 deal on Ebay. Do you have the contact number
for the seller? Milo
Here is a jpg of the ebay add
Paul Lamar
Paul,
I can not get that page to come up! milo
Try this
http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452
The store's name is Reut1209. Put that in google.
They have 3277 parts.
They sell the flywheel and stator separately.
They may be sold out of the $105 combo because I cannot find it again.
The Piaggio Typhoon Sfera and the Zip 50 cc air cooled 2 cycle engines
are the
same. 1991 to 2003
You can also buy the High Tension coils separately. Two of those
and a flywheel with magnets are all you need for an ignition system.
One HT coil may not be enough. I have not tried it yet.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.