Subject: Low cost CD ignition and a1ternator Vespa.
From: rotaryeng
Date: 9/4/2013, 11:02 AM
To: AAA-rotaryeng



Vespa Piaggio motor scooter stator and rotor has the potential for a
low cost capacitor discharge ignition system.

Milo has done some work on this already using much more expensive
outboard motor parts. Vespa's are made in the millions and the cost
of manufacture is much lower. The parts are pretty much the same as
the outboard parts but smaller.

The secret to this approach is the stator has a high voltage coil
that charges the ignition capacitor. This is a much cheaper and more
reliable way of providing 400 volts for the CD ignition.

Here is a new one on ebay for $105 plus $24 for shipping. Made in
Israel. Complete stator and rotating drum with magnets.

The higher RPM rotary will generate higher capacitor charging
current.

This is a very low cost CD ignition system that will also provide a
low current back up alternator in case the main electrical system
fails.

It is conceivable this will fit in my proposed new Ross copy gear
box.

Paul Lamar



Paul, I could not find the $105 deal on Ebay. Do you have the contact
number for the seller? Milo


Here is a jpg of the ebay add

Paul Lamar

Paul, I can not get that page to come up! milo

Try this


http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452
<http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452



The store's name is Reut1209. Put that in google.

They have 3277 parts.

They sell the flywheel and stator separately.

They may be sold out of the $105 combo because I cannot find it
again.

The Piaggio Typhoon Sfera and the Zip 50 cc air cooled 2 cycle
engines are the same. 1991 to 2003


You can also buy the High Tension coils separately. Two of those and
a flywheel with magnets are all you need for an ignition system. One
HT coil may not be enough. I have not tried it yet.

Paul Lamar

Hi Paul, On the 12a single rotor I used the Ford Edis4, with fixed
advance. I would be interested in a parts set, that would proved an
aircraft magnito function, installed on front of E-shaft Best
Regards, Rolland




Rolland, We considered the same option you have mentioned for the
magneto to be mounted on the front of the e shaft, but at 9000 rpm
for takeoff am not certain a small magnet rotor like found on the
Piaggio would be strong enough to handle 9000 rpm. Milo

Force in G's = V squared divided by the radius.

V is the velocity of the magnet traveling around the circumference
circle in inches per second. The radius is the radius of the drum.
Weigh the magnet. Bolt one side of the drum to a solid place (mill
table) and apply a tensile force with a hyd jack to the other side.


If that permanently distorts the drum wrap the outside with uni
carbon and epoxy.

When I get a drum in a month of so I will have the dimension and
magnet weight to do that test.


Paul Lamar




Paul,

Found these parts. They were used in a 250 CC 4-stroke, two cylinders
motorcycle engine. Not sure which type but it seems to be related to
GY6 engine used with ATV.

If you want to try them, I can bring them back with me from China
before end of September. They make tens of millions of these for both
domestic and export market.

It has two High Tension Coils instead of one, so more power to charge
up the capacitor.

Henry

That is good news Henry. How much would it cost to mail it?
Perfect for a two rotor.

What is the weight of the flywheel? What is the outside diameter.?
Inside diameter?

I want to calculate how it will hold up at 7500 RPM.
Milo is going for 9000 :)

Mine will not be here from Israel  until Oct 1st.

I am thinking of moving the sun gear thrust bulkhead closer
to the sun gear and fit OB Ign in that space. The OB flywheel
can be bolted to the spline plate to drive it.
The stator will be bolted to the new repositioned thrust bulkhead.
We then have the option to make the diameter of the
gear box bigger in that area to accommodate the ignition
flywheel.

I can use the turbo 3 rotor test engine to test gearboxes, couplings
and outboard motor  style capacitor discharge ignition systems.

I have a 2.17 Tracy gear box that I can modify and use.

Paul Lamar

 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.