Vespa Piaggio motor scooter stator and rotor has the potential for a low
cost capacitor discharge ignition system.
Milo has done some work on this already using much more expensive
outboard motor parts. Vespa's are made in the millions and the cost of
manufacture is much lower. The parts are pretty much the same as the
outboard parts but smaller.
The secret to this approach is the stator has a high voltage coil that
charges the ignition capacitor. This is a much cheaper and more reliable
way of providing 400 volts for the CD ignition.
Here is a new one on ebay for $105 plus $24 for shipping. Made in
Israel. Complete stator and rotating drum with magnets.
The higher RPM rotary will generate higher capacitor charging current.
This is a very low cost CD ignition system that will also provide a low
current back up alternator in case the main electrical system fails.
It is conceivable this will fit in my proposed new Ross copy gear box.
Paul Lamar
Paul, I could not find the $105 deal on Ebay. Do you have the contact
number for the seller? Milo
Here is a jpg of the ebay add
Paul Lamar
Paul, I can not get that page to come up! milo
Try this
http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452
The store's name is Reut1209. Put that in google.
They have 3277 parts.
They sell the flywheel and stator separately.
They may be sold out of the $105 combo because I cannot find it again.
The Piaggio Typhoon Sfera and the Zip 50 cc air cooled 2 cycle engines
are the same. 1991 to 2003
You can also buy the High Tension coils separately. Two of those and a
flywheel with magnets are all you need for an ignition system. One HT
coil may not be enough. I have not tried it yet.
Paul Lamar
Hi Paul, On the 12a single rotor I used the Ford Edis4, with fixed
advance. I would be interested in a parts set, that would proved an
aircraft magnito function, installed on front of E-shaft Best Regards,
Rolland
Rolland, We considered the same option you have mentioned for the
magneto to be mounted on the front of the e shaft, but at 9000 rpm for
takeoff am not certain a small magnet rotor like found on the Piaggio
would be strong enough to handle 9000 rpm. Milo
Force in G's = V squared divided by the radius.
V is the velocity of the magnet traveling around the circumference
circle in inches per second. The radius is the radius of the drum.
Weigh the magnet. Bolt one side of the drum to a solid place (mill
table) and apply a tensile force with a hyd jack to the other side.
If that permanently distorts the drum wrap the outside with uni carbon
and epoxy.
When I get a drum in a month of so I will have the dimension and magnet
weight to do that test.
Paul Lamar
Paul,
Found these parts. They were used in a 250 CC 4-stroke, two cylinders
motorcycle engine. Not sure which type but it seems to be related to
GY6 engine used with ATV.
If you want to try them, I can bring them back with me from China before
end of September. They make tens of millions of these for both domestic
and export market.
It has two High Tension Coils instead of one, so more power to charge up
the capacitor.
Henry
That is good news Henry. How much would it cost to mail it?
Perfect for a two rotor.
What is the weight of the flywheel? What is the outside diameter.?
Inside diameter?
I want to calculate how it will hold up at 7500 RPM.
Milo is going for 9000 :)
Mine will not be here from Israel until Oct 1st.
I am thinking of moving the sun gear thrust bulkhead closer to the sun
gear and fit OB Ign in that space. The OB flywheel can be bolted to the
spline plate to drive it.
The stator will be bolted to the new repositioned thrust bulkhead.
We then have the option to make the diameter of the gear box bigger in
that area to accommodate the ignition flywheel.
I can use the turbo 3 rotor test engine to test gearboxes, couplings and
outboard motor style capacitor discharge ignition systems.
I have a 2.17 Tracy gear box that I can modify and use.
Paul Lamar
Found it. GY6 is an original Honda design.
Henry
Don't know how much it weighs. But I will place order today for a
pair just to take a look. Once received, I will weight them. Price for
the pair is very reasonable. I found these from different vendors, from
less than $30 for the pair, to close to $60. There are so many variety
and configurations for the same engine for different output ratings.
If they work, we should definitely change the connectors to make them
more reliable.
Henry
-
Here is another possibility. Namely a Kuboto alternator.
http://www.ebay.com/itm/NEW-ALTERNATOR-KUBOTA-TRACTOR-M4950S-M5030DT-M5030DTL-M5030F-M5030L-M5030MDT-/360541751068?hash=item53f1f6871c&vxp=mtr
There are tons of them on ebay for as low as $67. You will need a couple
of high voltage charging coils going for $10 on ebay/
I have one someone sent me. The magnets are very powerful.
Since the rotor is only 4.1 inch OD it will easily fit in the Ross copy
gear box. It could also fit on one of Tracy's gear with some alterations.
Make sure you buy one with the permanent magnet field. I think some
require a battery with an electro magnetic field winding.
The rotor weighs 1.4 pounds with magnets and the stator weighs 1 pound.
When I put them in the Ross copy gear box the rotor will be welded to
the new coupler saving some weight on the rotor.
Paul Lamar
Paul,
Be careful of welding the rotor, heat can destroy magnetism. Milo
Yep. I know.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.