I've looked at a lot of turbo maps and have not found one that would
work for a 3-rotor at both sea level and at 18,000 msl.
Mark S.
Lancair ES, N/A 20b
Could you explain that a little more? How is the 3 rotor different in
that regard than any aircraft engine?
Paul Lamar
First, just to be perfectly clear... I'm not seriously considering
installing a turbo. I feel I'm at the design limits of the RD-2C now.
Without a beefier gearbox I would be asking for trouble. However, I
have fantasized about turbo-charging my 3-rotor for the benefits
reducing the exhaust DB.
Anyway, using this selection tool, I couldn't find a turbo that would
work at all altitudes on the P-port 3-rotor. Maybe you'll have better
luck than I did. Here's the link. (There are tutorials at the bottom for
help in understanding the spreadsheet design.)
http://www.turbodriven.com/performanceturbos/matchbot/index.html
<http://www.turbodriven.com/performanceturbos/matchbot/index.html>
<
http://www.turbodriven.com/performanceturbos/matchbot/index.html
<http://www.turbodriven.com/performanceturbos/matchbot/index.html>
Mark
You got me Mark. I have no idea what they are doing here.
Usually aircraft turbo's work it out with waste gates.
Why do they require engine RPM? IMHO that has nothing to do with
it. Your VE is too low. A p-port is 120%.
12.5 to one is max power. You want 17 to one for best BSFC.
BSFC at that mixture ratio is .47 and not .55.
Why does the muffler back pressure go to zero on run 5 and 6.
This simulation looks like it is for cars where acceleration may be
a factor and not for aircraft where it is not.
Do you have Hugh Macinnes book "Turbochargers"?
That is the bible with a chapter on aircraft applications.
The critical altitude is were the waste gate is completely closed.
The inter cooler size and design are critical.
Paul Lamar
--
Trouble is you are looking a SL vehicle turbos.....are you not? You
need to look at existing aircraft turbo specs (and they are miserably
hard to find!!!). A good aircraft turbo shop might be able to help us out?
Marc
Yes, I have that book, but must admit I haven't looked at it in a
number of years. The P-port pretty much gave me all the power I needed,
but it would be nice if it wasn't so loud. I was hoping we could come
up with a good muffler that would quiet the beast without robbing too
much power.
We need a gearbox that can survive a turbo 3-rotor.
Mark
Try the coax muffler. Less drag for an external muffler
and a lower note tone. The main problem with rotary noise is
the high frequency component.
It works a little bit like a ram jet, ejector or thrust augmenter
so it does not add too much to the aerodynamic drag. Just like a P-51
cooling system. The tone of the rotary sound is much more pleasant.
Also it can be visually inspected so it won't plug up if it ever
cracks. The outer casing is open at both ends. The inner tube
is cooled by the slipstream flowing between to the tubes..
Paul Lamar