This was quite a challenge getting it to fit under the existing cowl.
The solution was the S turns at the end of the 1.75" diameter runners.
Paul Lamar
That is some beautiful engineering and fabrication. I haven't seen a
purple engine since
Allis Chalmers introduced their "Road King" over the road truck engine
back in the late
sixties.
roger paxton
Mike Wills built it. He did a great job. I bought it from his widow.
Paul Lamar
Progress on the Holley installation. I had this 4 port manifold lying
around from the old
days when we were casting them and selling them. This was prior to the
P-port craze.
I lucked out in that Mike choose a 4 port 13B rather than a six port
13B. It really is a Turbo II
engine with out the turbo.
Mike had kluged up a stock manifold so this one is far better looking
and looks more
professional.
This is the rough position of the Holley. I may need a small bump in the
cowl but it
could do double duty as a cold air intake. Lots of stuff is coming off
the top of the
engine as four injectors and all the plumbing and wiring is no longer
needed.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.