Subject: Low cost CD ignition and a1ternator Vespa.
From: rotaryeng
Date: 9/18/2013, 10:48 AM
To: AAA-rotaryeng


 Vespa Piaggio motor scooter stator and rotor has the potential for a
 low cost capacitor discharge ignition system.

 Milo has done some work on this already using much more expensive
 outboard motor parts. Vespa's are made in the millions and the cost
 of manufacture is much lower. The parts are pretty much the same as
 the outboard parts but smaller.

 The secret to this approach is the stator has a high voltage coil
 that charges the ignition capacitor. This is a much cheaper and more
 reliable way of providing 400 volts for the CD ignition.

 Here is a new one on ebay for $105 plus $24 for shipping. Made in
 Israel. Complete stator and rotating drum with magnets.

 The higher RPM rotary will generate higher capacitor charging
 current.

 This is a very low cost CD ignition system that will also provide a
 low current back up alternator in case the main electrical system
 fails.

 It is conceivable this will fit in my proposed new Ross copy gear
 box.

 Paul Lamar



 Paul, I could not find the $105 deal on Ebay. Do you have the contact
 number for the seller? Milo


 Here is a jpg of the ebay add

 Paul Lamar

 Paul, I can not get that page to come up! milo

 Try this


http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452 <http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452>
<http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452 <http://stores.ebay.com/Reut1209/_i.html?_nkw=Piaggio+stator&submit=Search&_sacat=Reut1209&_sid=833388452>



 The store's name is Reut1209. Put that in google.

 They have 3277 parts.

 They sell the flywheel and stator separately.

 They may be sold out of the $105 combo because I cannot find it
 again.

 The Piaggio Typhoon Sfera and the Zip 50 cc air cooled 2 cycle
 engines are the same. 1991 to 2003


 You can also buy the High Tension coils separately. Two of those and
 a flywheel with magnets are all you need for an ignition system. One
 HT coil may not be enough. I have not tried it yet.

 Paul Lamar

 Hi Paul, On the 12a single rotor I used the Ford Edis4, with fixed
 advance.  I would be interested in a parts set, that would proved an
 aircraft magnito function, installed on front of E-shaft Best
 Regards, Rolland


 Hi Paul,

 Shipping is too expensive and takes too long. I will try to bring the
 rotors with me. Worst case is airport security says no and I lost
 US$20

 I put one upside down and op top of the other rotor. The magnetic
 flux is now condensed mostly inside the rotor. I cannot feel any pull
 to a screw driver stick to it so I assume it is OK to bring with me
 on the plane. Anyway, I will test it again with a paper clip before I
 go to the airport. I found that it is not illegal to ship magnets, it
 just have to have really small amount of measurable flux so it will
 not interfere with earth's magnetic field from 15 feet. (I think the
 rule is half or less of earth's average magnetic field)

 Henry

 I'll pay the shipping. Got to be less than $100.
 I really want those things. I am going to modify Tracy's
 gear box and install it on the RV4 and flight test that ignition.

 The carb is almost ready to go.

 Can we order them and have the seller ship to the US?

 Paul Lamar

I may have forgotten to mention that I will be back in LA this weekend. Hopefully with the rotor, definitely with the stator.

Henry


You will have to come up to the hangar and see my turbo compound.

Paul Lamar


 The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
 http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.