Subject: Tricycle gear RV4
From: rotaryeng
Date: 9/24/2013, 1:19 PM
To: AAA-rotaryeng


What do all you guys think of converting my RV4 to tricycle gear?

I have been told to wheel land it at 80 MPH.

That is a field length penalty and a much worse crash if you screw
up.

As I understand it they are dangerous in cross wind landings. I have
a friend with one that refuses to fly under sever cross wind
conditions.

Paul Lamar

It's not the beginning of April already is it ?

John


No john I am serious.  I have already spent $1000 with some jerk up
in Oregon trying to teach me to wheel land at 80 MPH.

Actually most of the time was spent  doing 360's just  under the
overcast and just above the trees like I needed to do that :)

When a tail wheel airplane first touches a paved runway with any
cross wind component at all the side force is ahead of the CG and by
any definition that is severe instability.

Tails wheels were designed back in the days when dirt air fields were
2 miles square and you could always land into the wind. Also the
coefficient of friction of  rubber tires on dirt or grass is much
less than on pavement.

I don't want to be put in position of either running out of gas or
landing in a cross wind with a tail wheel.

Paul Lamar

Hi, you might want to look at my take on tail draggers:
http://www.eaa.org/experimenter/articles/2010-11_bass.asp

Murry I. Rozansky


Murry is talking about taxiing here. Not touching down with a tail dragger.
Apples and oranges.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.