Subject: 4 rotor mag pick ups
From: rotaryeng
Date: 9/29/2013, 6:37 AM
To: AAA-rotaryeng


The sensors appear to be a distance from the metal. Could the weight
on the rear of the e-shaft be the balance weight? The pads for the
mag sensors could be on the flywheel. This is not the Le Mans engine
as it does not have the 3 spark plug housings. Did the factory
distribute or make available 4 rotor engines with two plugs?

Dale Davies


Dale, The dull grey flat steel stamped plate is the timing ring.

Notice the sensors' relationship to the parting surface for the
transmission (they appear to be on a different axis plane).

Yes, that is a balance weight on the rear of the e-shaft.

Yes this seems to be non-Le Mans four rotor prototype with less
emphasis on good gas mileage from Rick Engman's collection. Barry


Seems like those are pics of a Mazda 13J-MM, or 13J-L...http://cp_www.tripod.com/rotary/pg03.htm

-Dan

The Rotary Engine News Letter. Powered by Linux. ACRE NL web site.
http://www.rotaryeng.net <http://www.rotaryeng.net/. You Tube
http://tinyurl.com/beqqxas. Copyright 1998-2013 All world wide rights
reserved.