Subject: Aeroquip 666 hose and fittings
From: rotaryeng
Date: 9/29/2013, 4:38 PM
To: AAA-rotaryeng



Anybody know where to get good prices on -4
Aeroquip 666 hose and hose fittings?

AC spruce wants $52 for a reusable -4 hose end.

.188 ID Teflon liner SS Braid .312 OD.

Paul Lamar

I have some assorted -4 stuff. Various brands. Some re useable, some not. More than whats in this pic. What angles do you need?

Robert

I just need three straight hose ends.

The tricky bit about 666 is the hose ID at .188. Normally -4 has a hose ID of .25.
This is because of the extra wall thickness of the inner Teflon hose.
666 is used for brake line and other medium pressure hydraulic stuff.
Working pressure is 1500 PSI. .

There is also a tiny aluminum cone that goes between the SS braid and the Teflon
hose.

Paul Lamar

I think this is the size; .31OD and looks like .125 ID. Its stainless. Only found 1 so far.  Let me know if this pik got cropped. Original jpg of 3Mb but the attachment shows 2Mb.

Robert

I reduced the file size.
That looks like it. I will call baker in the morning. I need hose too.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.