Anybody know where to get good prices on -4 Aeroquip 666 hose and
hose fittings?
AC spruce wants $52 for a reusable -4 hose end.
.188 ID Teflon liner SS Braid .312 OD.
Paul Lamar
I have some assorted -4 stuff. Various brands. Some re useable, some
not. More than whats in this pic. What angles do you need?
Robert
I just need three straight hose ends.
The tricky bit about 666 is the hose ID at .188. Normally -4 has a
hose ID of .25. This is because of the extra wall thickness of the
inner Teflon hose. 666 is used for brake line and other medium
pressure hydraulic stuff. Working pressure is 1500 PSI. .
There is also a tiny aluminum cone that goes between the SS braid
and the Teflon hose.
Paul Lamar
I think this is the size; .31OD and looks like .125 ID. Its
stainless. Only found 1 so far. Let me know if this pik got cropped.
Original jpg of 3Mb but the attachment shows 2Mb.
Robert
I reduced the file size. That looks like it. I will call baker in the
morning. I need hose too.
Paul Lamar
I have some hose; what length?
Robert
I need 36 inches.
Paul Lamar