r
It's a side port (4 inlet 3 exhaust) I am putting it in as it is
(factory assembled) for now, I may p-port it at a later stage. I will be
using a rotec throttle body (don't want a computer) had one on my other
EZ, boy was it economical.
Also I was wondering if you had a circuit diagram for a CDI that will be
triggered by a couple of hall effect sensors ?
Cheers Chris in NZ
The stock manifold is rather high but it will probably fit in an EZ.
What I have on my list of things to do is build a 12 volt high voltage
supply for capacitor discharge ignition systems using a new chip by
Linear Tech.
The LT®3751 is a high input voltage capable flyback controller
designed to rapidly charge a large capacitor to a
user-adjustable high target voltage set by the transformer
turns ratio and three external resistors.
The actual CD circuit is the same as the outboard/Vespa and the TC 3
rotor
CD systems.
That Rotec "throttle body" is a copy of the American Ellison
carb :) It will work great when you get it sorted out. See notaposa.pdf
Paul Lamar
Chris,
I am using the Rotec on my 12A based single rotor. I agree with you
that it
is a great item. One thing I found out as an issue is the fact that
it does
not operate properly when installed an cross flow position and the slide
throttle horizontal. Rotec never gave me an answer to that finding.
I also am using a tuned intake, which required a relocation of the
reference
pressure probe.
This was the best thing I have tested short of EFI .
FWIW.
Richard Sohn
N2071U
http://www.fairpoint.net/~res12/home.html
<http://www.fairpoint.net/%7Eres12/home.html>
Richard,
Are you using the TBI-40-3 ?
John Gibbons
Richard,
Thanks for the tip about the T/B. I will be installing it the same
as you by the looks of it, with the slide in the vertical plane, I am
using the 48-4/5. Why did you need to move the reference pressure probe,
was it for a physical reason ?
Cheers Chris.
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.