Anybody know where to get good prices on -4
Aeroquip 666 hose and hose fittings?
AC spruce wants $52 for a reusable -4 hose end.
.188 ID Teflon liner SS Braid .312 OD.
Paul Lamar
I have some assorted -4 stuff. Various brands. Some re useable, some
not. More than whats in this pic. What angles do you need?
Robert
I just need three straight hose ends.
The tricky bit about 666 is the hose ID at .188. Normally -4 has a
hose ID of .25.
This is because of the extra wall thickness of the inner Teflon hose.
666 is used for brake line and other medium pressure hydraulic stuff.
Working pressure is 1500 PSI. .
There is also a tiny aluminum cone that goes between the SS braid and
the Teflon
hose.
Paul Lamar
Try these the -4 ends are reuseable but you need a new alloy sleeve
each time you remove the ends and you have to cut off the hose and start
again, they are very good quality fittings and very light, I thing -4 is
6000 psi burst pressure.
http://www.speedflow.com.au/hoses.html
John Burey
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.