Hi Chris,

I forgot to clarify some more.
Here it is.
My single rotor is with P-Port, so the TBI is located close to the rotor housing and the tuning tube is before the TBI. If you are running a side port intake, you may use the TBI just in the same way you did on the LYC.
Sorry for that.

Richard Sohn
N2071U

http://www.fairpoint.net/~res12/home.html



The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.