Subject: My RV4 Holley 2 Bar carb installation
From: rotaryeng
Date: 10/9/2013, 4:22 AM
To: AAA-rotaryeng



     This is coming along well. I will need a bump on the cowl but it
 can do
     double duty as a cold air scoop.

     I got rid of an amazing amount of stuff when I took out Tracy's EFI.
     It  is now almost as simple as an aircraft engine.

     Paul Lamar



 Paul,

 What does the Holley and leaning block weigh? Simple is good in the air.

 Regards,

 Matt

 About 5 pounds but that is off set by the weight of a throttle body,
 four injectors
 and computer. Not far from a wash.

 Here is  how much sticks out of the cowl roughly.

 Paul Lamar


Paul, you can mill the choke tower off for better airflow with a low
profile carb hat; its standard practice on blow through turbo setups
with Holleys.

Everett Rankin


I was wondering about that. Thanks for the tip. Will do.

What does that .25 inch dia. steel tube do that comes straight out of the top ?
Can I cut that off too?

Paul Lamar
-- 

 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.