Subject: My RV4 Holley 2 Bar carb installation
From: rotaryeng
Date: 10/9/2013, 7:21 AM
To: AAA-rotaryeng






This is coming along well. I will need a bump on the cowl but it can
do double duty as a cold air scoop.

I got rid of an amazing amount of stuff when I took out Tracy's EFI.
It  is now almost as simple as an aircraft engine.

Paul Lamar



Paul,

What does the Holley and leaning block weigh? Simple is good in the
air.

Regards,

Matt

About 5 pounds but that is off set by the weight of a throttle body,
four injectors and computer. Not far from a wash.

Here is  how much sticks out of the cowl roughly.

Paul Lamar


Paul, you can mill the choke tower off for better airflow with a low
profile carb hat; its standard practice on blow through turbo setups
with Holleys.

Everett Rankin


I was wondering about that. Thanks for the tip. Will do.

What does that .25 inch dia. steel tube do that comes straight out of
 the top ? Can I cut that off too?

Paul Lamar
----------
Doesn't that tube serve to equalize air-pressure (pressure above the
fuel = ambient) so mixture doesn't get richer quickly as you climb ?

RBerglund


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.