I'll bet you never saw this before :)
Pull the plug on the cast in oil gallery and tap to 3/8-18.
Don't over do it as you could crack the cast iron front end housing.
People claim taking the oil out of here (rather than the front cover)
going to the oil cooler reduces the oil temp 10 F.
Several sharp 90 degree turns eliminated.
Fast moving fluid does not like 90 degree turns.
Unsubstantiated.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.