This is a very flexible design that can be used with a variety of tube
bends to put the throttle
body or carb just about anywhere you want it. Carb or EFI. Can also be
tuned by changing the length
of the runners to move the torque peak up and down the RPM range. As a
rule of
thumb the HP peak is about 1500 to 2000 RPM above the torque peak. 18 to
20 inches long puts the
torque peak about 6000 RPM and the HP peak at about 7500.
The two outer ports on each side are combined into one for less skin
friction drag inside
the runners.
We can also tig one up to your specs.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net.
You Tube
http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.