Subject: Throw away the gears
From: rotaryeng
Date: 10/26/2013, 7:51 AM
To: AAA-rotaryeng



My wife wants to replace her Subaru, but all the latest models have a
CVT.  I've been doing some reading, and then started thinking ...

Don't laugh too hard!

... Could a CVT be modified to serve as a PSRU?

I've heard that the chain/belt transfers torque through pushing as well
as pulling on the chain/belt, so bearing loads should be much less than
will typical belt-drive PSRUs.

There might be an advantage to have adjustable PSRU ratios.

Many automotive PSRUs are rated at ~200HP, at least for short time
intervals.

I wonder how much junk could be thrown away to make a CVT super-light?

RBerglund

Not laughing :)

I doubt much. Chains are heavy as are big steel V belt pulley's.

Then the box is bigger and it has an undesirable thrust line off set.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.