Alex Molteno sent me this picture. Thanks Alex the pictures are fine.

To mod the hard points to mount a rad on the right side of the engine it is
best to move the upper right hard point 2 inch inboard for cowl clearance
purposes.

The picture shows the upper left but apply this idea to the upper right.
Sand the back side of the fire wall smooth and glue in the ply.
Then cover everything with 2 or 3 layers of carbon cloth.

The Tango is slowly becoming the "fast glass" of choice for the rotary.
There are about three or four in the works  as far as I know about.

Paul Lamar

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net.
You Tube http://tinyurl.com/beqqxas.
Copyright 1998-2013 All world wide rights reserved.