Subject: aircraft rotary engines
From: rotaryeng
Date: 10/28/2013, 9:16 PM
To: AAA-rotaryeng





Hello Paul, I'm Rodolfo Z. Alvarez, a businessman from the
Philippines. I used to fly in my younger years & owned an Ercoupe,
then a Cessna 140, & finally, a V-tail Bonanza. I would now like to
fly again, thus this request for subscription to your newsletter. I'm
particularly interested in amphibious aircraft since our country is
an archipelago of 7000+ islands Offhand, would a Mazda rotary be a
good alternative engine for a Coot or even a Seawind? Thank you.

We have both in the works. The Coot is flying. It gets on the step
and out of the water in just a few second with the NOS :) Lots of
fun.

Here are some pictures.

A 3 rotor or turbo 2 rotor would be needed for a Sea Wind.


Paul Lamar

     Here are some coming from YouTube:
http://youtu.be/P-3XOD17Jug
http://youtu.be/HhdsXX0uidA http://youtu.be/AGAxBrMIP0A

     There was a french homebuilt seaplane, the size not too different from a Grumann Albatross, high wing, two engines, painted in yellow, but I'm unable to locate the videos now,
   it included a flight to some Pacifc islands..
        Enjoy this, if you like. Salut †                                                       Jose Gros-Aymerich     Madrid, Spain

The news letter will be shut down for a few days.

Paul Lamar
-- 

The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube http://tinyurl.com/beqqxas
Copyright 1998-2013 All world wide rights reserved.