Subject: aircraft rotary engines
From: rotaryeng
Date: 11/1/2013, 3:11 PM
To: AAA-rotaryeng
CC: Ken Welter <rotarycoot.ken@gmail.com>



Hello Paul, I'm Rodolfo Z. Alvarez, a businessman from the Philippines.
I used to fly in my younger years & owned an Ercoupe, then a Cessna 140,
& finally, a V-tail Bonanza. I would now like to fly again, thus this
request for subscription to your newsletter.
I'm particularly interested in amphibious aircraft since our country is
an archipelago of 7000+ islands
Offhand, would a Mazda rotary be a good alternative engine for a Coot or
even a Seawind?
Thank you.
Rodolfo Z. Alvarez

We have both in the works. The Coot is flying. It gets on the step and out
of the water in just a few second with the NOS :) Lots of fun.

Here are some pictures.

A 3 rotor or turbo 2 rotor would be needed for a Sea Wind.


Paul Lamar

-- 
Thanks so much Paul. Beautiful fotos & articles. About the Coot, what hp Mazda rotary does it have, what's the fuel burn & what is his cruising speed?
Perhaps you can put me in touch with the owner via email?
Thanks again.
P.S. I found the article with video featuring Stephane

Rodolfo Z. Alvarez

The engine is about 150 to 170 HP with an additional 75 or so with NOS.

The fuel burn at 130 HP cruise would be about 9 or 10 gallons an hour based on a
fully leaned  BSFC of .47.

Cruising speed is 110 MPH.

http://en.wikipedia.org/wiki/Taylor_Coot

http://www.coot-builders.com/Coots_and_More.htm

You can buy one cheap :)

http://www.barnstormers.com/Amphibian,%20Coot-A%20Classifieds.htm

https://www.google.com/#q=Coot+aircraft+specs

Ken Welter <rotarycoot.ken@gmail.com>

Paul Lamar

 The Rotary Engine News Letter. Powered by Linux.
 ACRE NL web site. http://www.rotaryeng.net/
 You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2013 All world wide rights reserved.