Subject: Over view of switching supplies
From: rotaryeng
Date: 11/9/2013, 10:45 AM
To: AAA-rotaryeng


Kevin, Here is a simple over view of switching supplies.

I just built the circuit shown using a 6 V CT 60 cycle transformer and it worked fine
until I loaded it down. Then the 60V MOSFETs blew as push pull circuits are prone to do :)

I ordered some 500 V MOSFET and I will give it another chance.

If I can get this to work the cost will be under $20. $50 with a PC board.

The circuit has been around for CD IGNT since the early 70's when transistors
where first invented. Heath Kit made a CD IGNT with this transformer and using
power transistor's. I had one on my AH Sprite.

Paul Lamar

  The Rotary Engine News Letter. Powered by Linux.
   ACRE NL web site. http://www.rotaryeng.net
   You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2013 All world wide rights reserved.